"A Testbed Architecture for Auto-ID Technologies,” Soylemezoglu, A., Zawodniok, M. J., Cha, K., Hall, D., Birt, J., Saygin, C., and Sarangapani, J., Assembly Automation, Vol. 26, pp. 127-136, 2006.

“Adaptive Inventory Management Using RFID Data,” Mills-Harris, M.D., Soylemezoglu, A., and Saygin, C., International Journal of Advanced Manufacturing Technology.

“RFID Data-Based Inventory Management of Time-Sensitive Materials,” Mills-Harris, M.D., Soylemezoglu, A., and Saygin, C., presented at the 31st Annual Conference of the IEEE Industrial Electronics Society (IECON’05), Raleigh, North Carolina, 6-10 November 2005.

“Auto-ID Technologies and Solutions for Aerospace Manufacturing,” Saygin, C., Soylemezoglu, A., Birt, J., and Sarangapani, J. (Missouri S&T); Trimble, D. and Rouse, C. (Boeing); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“Adaptive Inventory Management for Cost Reduction in Network Centric Manufacturing Environments,” Saygin, C., Mills Harris, M. D., and Soylemezoglu, A. (Missouri S&T); Etzkorn, K. M. and Freeman, P. (Boeing); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“A Testbed for Validation and Benchmarking of Auto-ID Solutions,” Saygin, C., Cha, K., Soylemezoglu, A., Birt, J., Zawodniok, M., Fonda, J., Taqieddin, E., Mills Harris, M. D., and Sarangapani, J. (Missouri S&T); Trimble, D. and Siegel, T. (Boeing); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“Wireless Sensor Network-Based Monitoring and Prognostics for Aerospace Structures,” Sarangapani, J., Fonda, J., Zawodniok, M., Birt, J., and Watkins, S., presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“Interference Mitigation and Read-Rate Improvement in RFID-Based Network-Centric Environments,” Cha, K., Zawodniok, M., Ramachandran, A., Sarangapani, J., and Saygin, C., Journal of Sensor Review.

“A Systems Approach to Viable RFID Implementation in the Supply Chain,” Saygin, C., Sarangapani, J., and Grasman, S. E., Trends in Supply Chain Design and Management: Technologies and Methodologies.

“RFID on the Manufacturing Shop Floor: Applications and Challenges,” Saygin, C. and Sarangapani, J., Annual Industrial Engineering Research Conference (IERC), Orlando, FL, 20-24 May 2006.

“Adaptive and Probabilistic Power Control Algorithms for Dense RFID Reader Networks,” Cha, K., Ramachandran, A., and Sarangapani, J., Proceedings of the IEEE International Conference on Networking, Sensing and Control, pp. 643 – 648, April 2006.

“Distributed Power Control for Defense RFID Networks,” Sarangapani, J., Cha, K., Ramachandran, A., presented at the IEEE conference on Networking, Sensing and Control, Ft. Lauderdale, FL, April 2006.
 

“Dynamic Modeling of Fastener Installation,” Murray, S., Leu, M.C., Joshi, A., and Guttenberg, R., presented at the Defense Manufacturing Conference (DMC 2005), Orlando, FL, 30 November 2005.

“Modeling of Hand-Arm Vibration for Fastening Operations,” Joshi, A., Murray, S., Guttenberg, R., and Leu, M.C., presented at the 9th Annual Applied Ergonomics Conference, Lake Buena Vista, FL, 8 March 2006.

“Modeling of Hand-Arm Vibration,” Joshi, A., Guttenberg, R., Leu, M.C., Murray, S., presented at the 1st American Conference on Human Vibration, Morgantown, WV, 5-7 June 2006.

"Dynamic Modeling of Fastening Operations with Power Tools," Leu, M.C., Joshi, A., Murray, S., and Guttenberg, R., presented by M.C. Leu at the 2006 DMC, Nashville, TN, November 2006.

"Human Vibration During Fasterner Installation," Murray, S., Joshi, A., Leu, M.C., and Guttenberg, R., presented at the 2007 Applied Ergonomics Conference, Addison, Texas, 15 March 2007.
 

“SOS: A Self-Organizing Protocol for Wireless Sensor Networks,” Ratnaraj, S., Sarangapani, J., and Rao, V., presented by V. Rao at the SPIE Conference, February 2006.

“SOS: A Self-Organizing Protocol for Wireless Sensor Networks,” Ratnaraj, S., Sarangapani, J., and Rao, V., under review, IEEE Transactions on Wireless Communications.

“OEDSR: Optimal Energy Delay Subnet Routing Protocol for Wireless Sensor Networks,” Ratnaraj, S., Sarangapani, J., and Rao, V., presented by J. Sarangapani at the IEEE Conference on Networking, Sensing and Control, Ft. Lauderdale, FL, 23-25 April 2006.

“OEDSR: Optimal Energy Delay Subnet Routing Protocol for Wireless Sensor Networks,” Ratnaraj, S., Sarangapani, J., and Rao, V., under review, IEEE/ACM Transactions on Wireless Sensor Networks, June 2006.

“Pull-Type Tool Health Monitoring and Product Quality Verification Using Wireless Sensor Networks,” Fonda, J., Zawodniok, M., Birt, J., Sarangapani, J., and Saygin, C., Integrated Systems Health Management Conference, AFRL, Cincinnati, OH, 14-17 August 2006.

“Online Quality Monitoring of Threaded Fasteners Using Sensor-Embedded Hand-Held Tools,” Sarantakos, T., Mohan, D., Birt, J., Saygin, C., and Sarangapani, J., Integrated Systems Health Management Conference, AFRL, Cincinnati, OH, 14-17 August 2006.

"Adaptive Distributed Fair Scheduling and Its Implementation in Wireless Sensor Networks," Fonda, J. W., Zawodniok, M., Sarangapani, J., and Watkins, S. E., to appear in Proceedings to SMC 2006 Conference, Taiwan, October 2006.

"Development and Implementation of Optimized Energy-Delay Sub-Network Routing Protocol for Wireless Sensor Networks," Fonda, J. W., Zawodniok, M., Sarangapani, J., and Watkins, S. E., to appear in Proceedings to ISIC 2006 Conference, October 2006.

Publications Pending

“Accurate Hole Drilling Using Abrasive Waterjet in Titanium,” Galecki, G., presented at the Defense Manufacturing Conference 2005, Orlando, FL, November 2005.

“Development of an Abrasive Water Jet Optimal Abrasive Flow Rate Model for Titanium Alloy Cutting,” Zhang, S. J., Galecki, G., Swallow, C., and Summers, D. A., to be presented at the 18th International Conference on Water Jetting, Gdansk, Poland, 13-15 September 2006.

“Considerations in the Installation of a Precision 5-Axis Waterjet Cutting System,” Fossey, R. D., Summers, D. A., Galecki, G., Tyler, L. J., and Zhang, S., to be presented at the 18th International Conference on Water Jetting, Gdansk, Poland, 13-15 September 2006.

“Contrasting Performance in the Use of AWJ and ASJ Systems in the Cutting of Titanium,” Nambiath, P., Galecki, G., Summers, D. A., and Swallow, C., to be presented at the 18th International Conference on Water Jetting, Gdansk, Poland, 13-15 September 2006.

“Fabrication of Near Net-Shaped Ceramic Parts by Rapid Freeze-Prototyping and Freeze Drying,” Dogan, F., Leu, M. C., Hilmas, G. E., and Hayes, M. W., presented at the AeroMat 2005 Conference, Orlando, FL, June 6-9, 2005.

“Freeze-form Extrusion Fabrication of Ceramics,” Huang, T. S., Mason, M. S., Hilmas, G.E., and Leu, M. C., presented at and published in the Proceedings of the 16th Solid Freeform Fabrication Symposium, Austin, TX, August 1-3, 2005.

“Freeze Spray Rapid Prototyping of Graded Ceramic Composites,” Dogan, F., Jongprateep, O., Fu, F., and Abbott, A., presented at the 9th International Ceramic Processing Science Symposium, Coral Springs, FL, Jan. 8–11, 2006.

“Freeform Extrusion of High Solids Loading Ceramic Slurries, Part I: Extrusion Process Modeling,” Mason, M. S., Huang, T. S., Landers, R. G., Leu, M. C., and Hilmas, G. E., presented at and published in the Proceedings of the 2006 Solid Freeform Fabrication Symposium, Austin, TX, August 14-16, 2006.

“Freeform Extrusion of High Solids Loading Ceramic Slurries, Part II: Extrusion Process Control,” Mason, M. S., Huang, T. S., Landers, R. G., Leu, M. C., and Hilmas, G. E., presented at and published in the Proceedings of the 2006 Solid Freeform Fabrication Symposium and published in the conference proceedings, Austin, TX, August 14-16, 2006.

“Freeze Spray Rapid Prototyping of Graded Ceramic Composites,” Dogan, F., O., Fu, Jongprateep, F., and Abbott, A., presented at and published in the Proceedings of the 2006 Solid Freeform Fabrication Symposium and published in the conference proceedings, Austin, TX, Aug. 14-16, 2006.

“Freeze-form Extrusion Fabrication of Ultra High Temperature Ceramics,” Huang, T. S., Mason, M. S., Hilmas, G.E., and Leu, M. C., to be presented at the 2006 Materials Science and Technology Conference, Cincinnati, OH, October 15-19, 2006.

“Freeze-form Extrusion Fabrication of Ceramics,” Huang, T. S., Mason, M. S., Hilmas, G.E., and Leu, M. C., Virtual and Physical Prototyping, Vol. 1, No. 2, pp.93-100, 2006.

“Aqueous Paste Freeze-form Extrusion Fabrication of Alumina Components,” Huang, T. S., Mason, M. S., Hilmas, G.E., and Leu, M. C., Rapid Prototyping Journal, to be submitted.

"Freeze-spraying Fabrication of Laminated Alumina/Zirconia Composites," Fu, F., Jongprateep, O., Abbott, A., and Dogan, F., Journal of the American Ceramic Society, to be submitted.
 

“Research and Development of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures,” Liou, F., Slattery, K., Choi, J., Chou, H., Kinsella, M., Newkirk, J., and Young, K., presented at the Defense Manufacturing Conference, DMC 2005, Orlando, FL, November 2005.

“A Phase-Field Model for Microstructure Evolution of Laser Cladding Process,” Choi, J. and Cao, Y., presented at the 2005 International Congress on Applications of Lasers & Electro-Optics, Miami, FL.

“Research on a Hybrid Manufacturing Process for Aerospace Structures,” Liou, F., Slattery, K., Choi, J., Chou, H., Kinsella, M., Newkirk, J., and Young, K., presented at AeroMat 2005, Orlando, FL, June 2005.

“Destructive Test of Laser Additive Manufactured Titanium 5Al-5V-5Mo-3Cr Test Specimens,” Chou, H., Slattery, K., Liou, F., and Kinsella, M., 17th Annual AeroMat Conference, Seattle, Washington, 15-18 May 2006.

“Evaluation of Metal Additive Manufactured Ti-6Al-4V,” Slattery, K., presented at the 17th Annual AeroMat Conference, Seattle, WA, 15-18 May 2006.

“Numerical Simulation and Prediction of Dilution Depth and Lack of Fusion During Laser Deposition,” Fan, Z., Ruan, J., Sparks, T., Yang, Y., Bao, Y., and Liou, F., to be presented at the 2006 SFF Symposium, August 2006.

“Implementation of Metal Additive Manufactured Titanium Alloys for Aerospace Applications,” Slattery, K., presented at SME Rapid 2006.

“Applications of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures,” to be presented at the 2006 SFF Symposium, August 2006.
 

Task 4.2.1 - Hybrid Deposition and Removal Process for Aerospace Parts with Complex Geometry
 

"Applications of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures," Liou, F., Slattery, K., Kinsella, M., Newkirk, J., Chou, H., and Landers, R., presented in the Seventeenth Solid Freeform Fabrication Symposium, Austin, TX, 14-16 August 2006.

"Multiscale Modeling of Transport Phenomena an dMicrosturcture Evolution During Laser Deposition," Fan, Z., Liou, F., and Newkirk, J., to be presented at AeroMat 2007, Baltimore, MD, 25-28 June 2007.
 

"Blast Mitigation for Structures," Baird, J., Nolte, R. A., Selke, D., and Dinan, R. J., presented at the Structural Engineering Institute of the American Society of Civil Engineers' 2006 Structures Congress, 18-20 May 2006.

“Energy Transport and Material Removal During Femtosecond Laser Ablation of Wide Bandgap Materials,” Jiang, L. and Tsai, H. L., International Journal of Heat & Mass Transfer, Vol 48, No 3-4, 2005.

“Improvements on Two-Temperature Models and Its Applications in Ultrashort Laser Damage of Metal Films,” Jiang, L. and Tsai, H. L., ASME Journal of Heat Transfer, Vol 127, No 10, 2005.

“Repeatable Nanostructures in Dielectrics by Femtosecond Laser Pulse Trains,” Jiang, L. and Tsai, H. L., Applied Physics Letters, Vol 87, No 15, 2005.

“Fabrication of Nano-Structures Using Femtosecond Lasers,” Tsai, H. L. and Jiang, L., International Symposium on Thermal Science and Engineering, Beijing, China, 23–25 October 2005.

“Fundamentals of Energy Cascade During Ultrashort Laser-Material Interactions,” Tsai, H. L. and Jiang, L., SPIE Photonics West LASE, San Jose, CA, 22–27 January 2005.

“Micro-/Nano-Scale Energy Transport & Material Removal During Ultrafast Laser- Material Processing,” Tsai, H. L. and Jiang, L., Colloquium on Micro/Nano Thermal Engineering, Seoul National University, Korea, 17–20 August 2005.

“Modeling the Ablation of Dielectrics by Ultrashort Laser Pulse Trains,” Jiang, L. and Tsai, H. L., 6th International Symposium on Laser Precision Microfabrication, Williamsburg, VA, 4-8 April 2005.

“Modeling of Ultrashort Pulse-Train Laser Heating of Metal Films,” Jiang, L. and Tsai, H. L., Proceedings of the ASME Heat Transfer Summer Conference, San Francisco, CA, No. HT2005-72199, 17-22 July 2005.

“Modeling the Femtosecond Laser Pulse-Train Ablation of Dielectrics,” Jiang, L. and Tsai, H. L., Proceedings of the ASME International Mechanical Engineering Congress & Exposition, Orlando, FL, No. IMECE2005-81774, 15-11 November 2005.

“Femtosecond Laser Single Pulse Ablation of Wide Bandgap Materials,” Tsai, H. L. and Jiang, L., Proceedings of the 2005 NSF DMII Grantees Conference, Scottsdale, AZ, 3-6 January 2005.

“Energy Transport and Nanostructuring of Dielectrics by Ultrashort Laser Pulse Trains,” Jiang, L and Tsai, H. L., ASME Journal of Heat Transfer, 2006 (in press).

“Plasma Modeling for Femtosecond Laser Ablation of Dielectrics,” Jiang, L. and Tsai, H. L., Journal of Applied Physics, 2006 (in press).

“Fabrication of 3D Micro-Optical Lenses in Photosensitive Glass Using Femtosecond Laser Micromachining,” Cheng, Y. and Tsai, H. L., 4th International Congress on Laser Advanced Materials Processing, Kyoto, Japan, 16-19 May 2006.

“Improved Two-Temperature Modeling of Ultrashort Laser Pulse Train Processing of Metal Thin Films,” Jiang, L. and Tsai, H. L., International Journal of Heat and Mass Transfer, 2006 (submitted).

“Fabrications of 3D Micro-Optical Lenses in Glass Using a Femtosecond Laser,” Cheng, Y. and Tsai, H. L., ASME International Mechanical Engineering Congress & Exposition, Chicago, IL, 5-10 November 2006 (submitted).

“Femtosecond Laser Fabrication of a Lab-on-a-Chip Device in Glass for Enhancing Detection Sensitivity,” Cheng, Y., Hockenhull, T. E., and Tsai, H. L., ASME International Mechanical Engineering Congress & Exposition, Chicago, IL, 5-10 November 2006 (submitted).

“Materials Removals During Femtosecond Laser Non-Thermal Ablation of Dielectrics,” Jiang, L. and Tsai, H. L., ASME International Mechanical Engineering Congress & Exposition, Chicago, IL, 5-10 November 2006 (submitted).

“Defect Detection in Friction Stir Welds,” Phukan, H. and Richards, V. L. (Missouri S&T); Lederich, R. (Boeing-St. Louis); poster paper presented at ASNT (American Society of Nondestructive Testing) Fall Conference and Quality Testing Show 2005, Columbus, OH.

“Hardware Testbeds for Dynamic Modeling and Control of Friction Stir Welding,” Yu, Y. and Landers, R. L. (Missouri S&T); Bolser, D. R. and Talwar, R. (Boeing); Ballard, D. L. (AFRL); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“Neural Network Modeling of Friction Stir Welding of Butt Joints with Gaps,” Krishnamurthy, K. (Missouri S&T); Talwar, R. (Boeing); Ballard, D. L. (AFRL); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“Influence of Processing Parameters on the Mechanical Properties of Friction Stir Welded 2024-T8 Aluminum Alloy,” Mishra, R. S. and Dixit, V. (Missouri S&T); Bolser, D. R., Lederich, R. J., and Talwar, R (Boeing); Ballard, D. L. (AFRL); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.

“Eddy Current and Destructive Evaluation of Friction Stir Welded Butt Welds in Aluminum Plates,” Richards, V. L. and Phukan, H. (Missouri S&T); Talwar, R., Lederich, R. J., and Bolser, D. R. (Boeing); Ballard, D. L. (AFRL); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.
 

"Thermoplastic Sealants for Friction Stir Welded Lap Joints," Van Aken, D. C., Lederich, R. J., Schuman, T., and Royer, Z. L., THERMEC 2006: International Conference on Processing & Manufacturing of Advanced Materials, Vancouver, Canada, 4-8 July 2006.

“Corrosion-Fatigue Studies of Friction Stir Welded Lap Joints,” Van Aken, D. C., Lederich, R. J., and Ballard, D. L., Fatigue 2006: 9th International Fatigue Congress, Atlanta, GA, 14-19 May 2006.

“Corrosion-Fatigue Studies of Friction Stir Welded Lap Joints,” Van Aken, D. C., Lederich, R. J., and Ballard, D. L., Fatigue 2006: 9th International Fatigue Congress, Atlanta, GA, paper FT 118.

Task 7.1 - Environmentally Friendly Corrosion Resistant Coating System
 

“Development of Spontaneous, Nanostructured Cerium Oxide Based Corrosion Pretreatment Processes for A1 2024 and A1 7075 Alloys,” O’Keefe, M. J., Edington, J., Padwal, A., Yu, P., Williams, A., Hayes, S., Fahrenholtz, W., Stoffer, J., and O’Keefe, T. (Missouri S&T); Gaydos, S. and Triplett, L. (Boeing); Ballard, D. L. (AFRL); presented at the Tri-Services Corrosion Conference, Orlando, FL, November 2005.

“Characterization of Alkaline Cleaned and Cerium Oxide Coated Al 2024-T3,” Jones, P., Padwal, A., Yu, P., O'Keefe, M. J., Fahrenholtz, W., and O'Keefe, T., to be presented at the Materials Science and Technology Conference, Cincinnati, OH, October 2006.

Task 8.1 - Advanced NDE Development for Bonded Repair of Aging Aircraft
 

“Kissing Bond Detection for Same Material Weld/Bond Inspection Using Correlation Images” Neal, S., presented at ASNT Fall Conference, Columbus, OH, October 2005.

“High Accuracy Disbond Thickness Estimation Scheme Employing Multiple-Frequency Near-Field Microwave Measurements,” Abou-Khousa, M. and Zoughi, R., Proceedings of the IEEE Instrumentation and Measurement Technology Conference (IMTC 2006), pp. 1967-1970, April 2006.

“Comparison of X-ray, Millimeter Wave, Shearography and Through-Transmission Ultrasonic Methods for Inspection of Honeycomb Composites,” Abou-Khousa, M. A., Ryley, A., Kharkovsky, S., Zoughi, R., Daniels, D., Kreitinger, N., and Steffes, G., to be presented at and the paper to appear in the proceedings of the QNDE 2006 Conference, Portland, OR, 30 Jul-4 August 2006.

“Disbond Thickness Evaluation Employing Multiple-Frequency Near-Field Microwave Measurements,” Abou-Khousa, M. and Zoughi, R., in review, IEEE Transactions on Instrumentation and Measurement, June 2006.
 

“Millimeter Wave Imaging of Corrosion under Paint in Aluminum Structures,” Ghasr, M., Kharkovsky, S., Zoughi, R., O’Keefe, M. J., and Palmer, D., presented at the 2005 Quantitative Nondestructive Evaluation (QNDE) Conference, Brunswick, ME, August 2005.

“Millimeter Wave Imaging of Corrosion under Paint: Comparison of Two Probes,” Ghasr, M. T., Kharkovsky, S., Zoughi, R., O’Keefe, M., and Palmer, D., in Review of Progress in Quantitative Nondestructive Evaluation 25B, edited by D.O. Thomson and D.E. Chimenti, AIP Conference Proceedings, Vol. 820, American Institute of Physics, Melville, NY, 2006, pp. 447-454.

“Application of Millimeter Wave, Eddy Current and Thermographic Methods for Detection of Corrosion in Aluminum Substrate,” Ryley, A. C., Ghasr, M. T., Kharkovsky, S., Zoughi, R., and Steffes, G., to be presented at and the paper to appear in the proceedings of the QNDE 2006 Conference, Portland, OR, 30 Jul-4 August 2006.

“Fusion of Microwave and Eddy Current Data for a Multi-Modal Approach in Evaluating Corrosion under Paint and in Lap Joints,” Gupta K., Ghasr, M. T. A., Kharkovsky, S., Stanley, R. J., Zoughi, R., Padwal, A., O’Keefe, M., Palmer, D., Wood, N., Blackshire, J., and Steffes, G., to be presented at and the paper to appear in the proceedings of the QNDE 2006 Conference, Portland, OR, 30 July-4 August 2006.

“Experimental Evaluation and Finite Element Analysis of Vacuum Infused Stiffened Composite Panels,” Chandrashekhara, K., Sundararaman, S., Berkel, T., Bilow, G., and Fielding, J., presented and published in the Proceedings of SAMPE Technical Conference, Seattle, WA, pp. 1-10, 2005.

“Manufacturing and Performance Improvements of Stiffened Carbon/Epoxy Panels Using VARTM Process,” Chandrashekhara, K. and Sundararaman, S. (Missouri S&T); Berkel, T. R. and Bilow, G. B. (Boeing); presented at the 2005 AeroMat Conference, Orlando, FL, 6-9 June 2005.
 

"A Refined Porous Media Model for Mold Filling in Vacuum Infustion Process," to be presented at the SAMPE'07 Symposium & Exhibition, Baltimore, MD, 3-7 June 2007.
 

“Effect of B4C Additives on the Densification of ZrB2,” Zhang, S., Hilmas, G. E., and Fahrenholtz, W. G., presented at the National Space and Missile Materials Symposium, Las Vegas, NV, 26 Jun-1 July 2005.

“Pressureless Densification of Zirconium Diboride with Boron Carbide Additions,” Zhang, S. C., Hilmas, G. E., and Fahrenholtz, W. G., Journal of the American Ceramic Society , Vol. 89, No. 5, pp. 1544–1550, 2006.

“Mechanical Properties of Pressureless Sintered Zirconium Diboride,” Zhang, S. C., Hilmas, G. E., and Fahrenholtz, W. G., manuscript in preparation - to be submitted to the Journal of the American Ceramic Society.

“Effect of Boron Carbide (B4C) Additives on the Densification of Zirconium Diboride (ZrB2),” Zhang, S., Hilmas, G. E., and Fahrenholtz, W. G., presented at the 30th International Conference on Advanced Ceramics and Composites, Cocoa Beach, FL, 23-28 January 2006.

"Pressureless Sintering of ZrB2/SiC Ceramics," presented at the 31st International Cocoa Beach Conference & Exposition on Advanced Ceramics and Composites, Daytona Beach, FL, 20-26 January, 2007.

"Multifunctional Optimization Approach for Predicting Bulk Metallic Glass Systems," Gorantla, S.M., Wang, Y., Miller, F.S., Mishra, R.S., Miracle, D.B., and Senkov, O.N., Case number MLLM 0019, presented by S.M. Gorantla at the Bulk Metallic Materials Symposium during the TMS Annual Meeting, 26-28 February 2007.

"Formability of Zr(57)Nb(5)AL(10)Cu(15.4)Ni(12.6) Bulk Metallic Glass," Wang, Y., Gorantla, S.M., Mishra, R.S., Miller, F.S., Brow, R.K., and Miracle, D.B., Case number MLLM 0022, presented by Y. Wang at the Bulk Metallic Materials Symposium during the TMS Annual Meeting, 26-28 February 2007.

"Formability of a Mg-Cu-Ag-Y Glass," Ross, N., Wang, Y., Mishra, R., Miracle, D.B., Senkov, O., and Lederich, R., Case number MLLM 0021, presented by N. Ross at the Bulk Metallic Materials Symposium during the TMS Annual Meeting, 26-28 February 2007.

"TTT Diagram for Magnesium and Zirconium-Based Bulk Amorphous Alloys," Reis, S.T., Ross, N., Brow, R.K., Miracle, D., Senkov, O., and Lederich, R., Case number MLLM 0020, presented by S.T. Reis at the Bulk Metallic Materials Symposium during the TMS Annual Meeting, 26-28 February 2007.

“Aerospace Rework in a Lead-Free World,” O’Keefe, M. J. and Colfax, R., published in Assembly Magazine, pp. 36-42, June 2005.

“Perspectives on Repaired Lead-Free Solder Joints,” Colfax, R. and O’Keefe, M. J. (Missouri S&T); Amick, P. and Kleine, D. (Boeing); Vetter, S. and Murry, D. (Northrop Grumman Interconnect Technologies), presented and published at the APEX 2005 Conference, Anaheim, CA, 23 February 2005.

“Vibration Testing of Repaired Sn-Pb/SAC Solder Joints,” O’Keefe, M. J., Perez, M. G., Colfax, R., Vetter, S., Murry, D., Kleine, D., and Amick, P., Electronic Components and Technology Conference, San Diego, CA, 1 June 2006.

“Effect of Thermal Cycling on Repaired Lead and Lead-Free Solder Joints,” O'Keefe, M. J., Perez, M., Doering, K., Eckhoff, V., Colfax, R., Murry, D., Vetter, S., and Kleine, D., to be presented at the Materials Science and Technology Conference, Cincinnati, OH, October 2006.

"Aerospace Response to Lead-Free Solder: A Program Manager's Guide," Amick, P., Touw, A., Condra, L., and Procarione, W., presented at the Aerospace Lead Free Symposium during the APEX 2007 Conference, Los Angeles, CA, 21 February 2007.

"The Effect of Mechanical Vibration on Thermally Cycled, Lead-Free and Mixed Alloy Solder Joints," O'Keefe, M., Perez, M., Doering, K., Colfax, R., Murry, D., Vetter, S., and Kleine, D., presented at the Aerospace Lead Free Symposium during the APEX 2007 conference, Los Angeles, CA, 21 February 2007.

Presentation and paper publication at the APEX/Electronic Circuits World Conference 10 in Anaheim, CA on February 24, 2005.

“Anticipating EMI and On-Board Interference in Automotive Platforms,” Sun, S., Liu, G., Pommerenke, D. J., and Drewniak, J. L. (Missouri S&T); Kautz, R. W. and Chen, C. (Ford Motor Co.); 2004 EMC Symposium.
 

“A Maxwell Garnett Model for Dielectric Mixtures Containing Conducting Particles at Optical Frequencies,” Koledintseva, M. Y., DuBroff, R. E., and Schwartz, R. W., Journal of Electromagnetic Waves and Applications, June 2006.

"Modeling of Dielectric Mixtures Containing Conducting Inclusions with Statistically Distributed Aspect Ratio," Koledintseva, M.Y., Chandra, S.K.R., DuBroff, R.E., and Schwartz, R.W., published in Progress in Electromagnetic Research (PIER), vol. 66, pp. 213-228, 2006.